"Sit anywhere" Uni-Q sound
At the heart of the evolved Q Series is the Uni-Q driver array. The signature innovation places the tweeter in the acoustic centre of the midrange and bass cone, bringing the acoustic ideal of a single point source closer than ever to realisation. The result is a more detailed, accurate three-dimensional sound image, which is dispersed more evenly throughout the room than is possible with any conventional speaker. Uni-Q's ultra-wide dispersion is further enhanced through KEF's 'tangerine' waveguide over the tweeter dome.
Damped tweeter loading tube
With the addition of the damped tweeter loading tube providing a gentle termination of sound produced from the back of the tweeter, lower treble performance is improved dramatically and a new low-distortion inductor on the crossover provides cleaner bass.
New system design
The closed box midrange cabinet design reduces the load on the Uni-Q midrange cone, increasing clarity and detail while delivering cleaner, punchier bass. Midrange clarity is enhanced again through improvements to the mid-bass driver that allowed the DC blocking capacitor to be eliminated. Its removal also created a more natural bass roll-off between the drivers.
Beefier LF drivers and ABRs
Low-frequency (LF) drivers now have a larger roll surround, along with a new suspension to produce cleaner bass at high volumes. A new cone structure improves midrange clarity, and an enhanced Auxiliary Bass Radiator (ABR) with a new surround and rear suspension delivers better controlled and more impressive bass.
|Design||Two and a half-way bass reflex|
|Drive Units||165mm (6.5in.) aluminium Uni-Q
25mm (1in.)vented aluminium dome HF
165mm (6.5in.) aluminium LF
2 x 165mm (6.5in.)aluminium ABR
|Frequency range free field||42Hz (-6dB)|
|Frequency Response||48Hz-28kHz (±3dB)|
|Nominal Impedance||8 Ohms (min.3.8 Ohms)|
|Dimensions||H x W x D:
923 x 210 x 306 mm
977 x 323 x 310 mm (with Plinth)
|Document Download||Q Series Brochure
Q Series Information Sheet
Q Series User Manual